3D Design | 3D Chassis

Back > 3D FILES > 3D CHASSIS

Found: 5 items On view 1 - 5

List View

You can down load the zipped stl files, seperate files for post and cap, from the image link below. You may need to resize the height of the posts as these are set at 15mm.

Click to enlarge

Adjustable slot car stand

This is a simple adjustable length two part slot car stand. The parts can be printed as per the file and cut to length or you can trim the parts before printing. As designed the two parts should be an interference fit but a spot of glue will help keep them together. The little teeth on the stand can be removed to give support for F1 type cars or for fitting around motors. Another option is to remove all the teeth and replace with a foam pad as this will help stop the car from sliding about.

Click the button to download the stl file.

Please click thumbs to expand

Click to enlarge

Adjustable slot car stand for crystal cases

This is a simple adjustable length two part slot car stand that should fit most crystal display boxes. The guide holder should fit between most cases ribs, if they are moulded in the base. The rear mart of the stand may need to be trimmed quite short depending on the case design and the car. The parts can be printed as per the file and cut to length or you can trim the parts before printing. The stand will need gluing to the display case base. Sticking some thin neoprene foam on top of the stand will help stop the car from sliding about. br>

Click the button to download the stl file.

Please click thumbs to expand

Click to enlarge

Airfix 1/32 scale VW Beetle chassis (also works with Arii kit)

This 3D chassis has been designed to fit the Airfix 1/32nd scale Airfix Beetle kit.

The chassis includes the running boards which will need to be trimmed to size.

The chassis was designed using the running gear from a PSC adjustable chassis but should take any standard S can motor.

You will need four small screws to fit the rear axle bearing straps. The included blocks are designed to be glued to the body side to act as the chassis mounts.

With suitable trimming of the running boards this chassis will also fit the Arii VW Beetle kit.

Click the button to download the stl file from Cults 3D website. The price for this chassis is 3.62eu.

Click to enlarge

Fully adjustable 1/32nd scale slot car chassis

This 3D chassis has been designed to be fully adjustable with any program that can read files in 3MF format. Windows 10 users can edit the file with 3D Builder. All dimensions of the chassis can be changed including the wheelbase, screw mounting points, axle heights, guide position and the motor mounts can be changed to take any can motor.

For instructions on adjusting the chassis have a look at the details posted on Slot Forum International here.

Click the button to download for free from Cults 3D website.

test

version 2 print

adjustable chassis

chassis

version 2 design

Please click thumbs to expand

Categories | Privacy Policy | Copyright Notice | Contact Us | Links to Forum