From Keith 23-08-2021 (16:10:56) Latest arrivals
Received this Airfix McLaren M23. There is a bit of damage to the rear chrome and wing but I will use the parts from my body kit to fix this and it will be fitted with a Penelope Pitlane chassis for club racing.
Also received a selection of urethane tyres from RS Slot Cars...
A pair my Revel Lotus Cortina, already fitted.
2 pair for the sidewinder Scalextric GT40s.
2 pair of Monogram 9mm wide.
2 pair of Monogram 6mm wide.
3 pair for the Airfix slimline clubman chassis.
A pair for the Airfix Vauxhall Viva.
And a pair for the cube motor Airfix Mini Cooper.
From Keith 19-08-2021 (16:09:43) Latest arrivals
Little delivery of parts from Pendel Slot Racing today...
Some 9T brass pinions for my slimline can motors.
Some 28T and 27T inline pinions.
some 45 and 48mm axles.
All the above parts are from Slot.it
Some PCS 14" alloy wheels complete with tyres and steel inserts, these are for use with the Airfix Ford Zodiac MkIII which now has a PCS chassis fitted.
A SRP 30k slimline motor.
And a couple of Scaleauto 25k motors.
Also received this 35 ohm MRRC controller which appears to be new. This will replace the 30 and 40 ohm Airfix/MRRC barrel controllers I'm using and my Airfix layout at the moment once fitted with a 2amp plug.
As this was an eBay charity shop sale I also bought this Scalextric E/2 Aston Martin complete with box and instructions. It's a non runner at the moment as it needs a motor and braids. It should also have lights but these are also missing, not sure if I will replace them, with LEDs, or not.
From Keith 18-08-2021 (16:09:29) Latest arrivals
Received the following white kit cars today from Top Slots n Trains...
Policar Ferrari 330 P4.
Slot.it Maserati MC GT3.
And a Racer Sideways Ford Mustang Group 5.
All these are for racing at the club I am now attending.
From Keith 07-08-2021 (16:06:26) Latest arrivals
I ended up being the only bidder for this Monogram Ferrari 330 P/LM (Ferrari 250LM) fitted with the drop arm chassis.
From Keith 21-07-2021 (16:01:32) Latest arrivals
Received this Monogram Jaguar Lightweight E-Type from Le Mans 1964 today from the USA, this will be getting new numbers to represent the car as it raced at the Goodwood TT in 1964.
From Keith 18-07-2021 (16:41:28) Track update
Even before this latest little heat wave I was having heat related problems with the foam board infill on the new layout. The room the track is in faces south and although the track is behind closed curtains it still takes the full brunt of the sun on a clear day. I haven't had any problems with any of the other tracks here but then none have had solid infills.
The Artin track was just laid on the baseboard covering with grass scatter applied to the covering, this track is still there under the plywood cover and the visible parts seem ok. The Scalextric and Jouef track along with the first Airfix Monte Carlo track just sat on top of the plywood as did the previous Airfix layout and the last Monte layout. Both of these had some borders in place but the tracks all had room to move apart from the original Artin layout which ended up being glued to the baseboard covering bny the PVA used for the scatter.
I don't know if it's the foam board expanding, the track moving or a bit of both but there are problems with the foam board. In a lot of places the edge of the foam board has lifted above the track edge and most of the places that I added a small amount of filler this has come free from the track and foam board and fallen to the bottom of the gap.
A lot of the wider cars don't like the raised edges and it is even de-slotting some cars so with this in mind I need to find a solution. I did think about cutting the foam board back a little bit to leave a small gap and allow for expansion but as some of the cars, mainly the older Airfix and Jouef cars have very rounded profile tyres I'm not sure how well this would work.
Option two was to cut the foam board away and replace the plastic Airfix borders as at least they will move with the track if that is indeed the problem. Only problem with this is that I don't have enough borders and they are very hard to find and also Airfix never made any inner borders.
With option two in mind I have spent most of today experimenting with 3D printing some borders and they seem to be coming out quite good. Need to continue tweaking but we will see what happens tomorrow.
From Keith 14-07-2021 (16:00:58) Latest arrivals
Received two sets of decals today...
For MRRC Williams FW07 from 1979 Alan Jones #27 and Clay Regazzoni #28.
Also for the MRRC M23 of James Hunt.