I've finished building the second chassis for the SRC BMW and both car and second chassis have been tested on my home track and run quite well, the car is very stable. Next up will be to test both on my clubs track.

I've also changed the Policar pod in the Eagle Weslake as when running last week at my club it was very noisy, I've swopped the motors in the pods so I'm still running the same motor.

As I now had this pod spare I have decided to start work on my Super Shells F1 Ferrari 518 as I also have a Pendle's Super Shells 3D printed front end for the pod. So far all I've don't is glue the mounting post in place, just one at the front as the motor pod is supported by the drivers cockpit tray.

The SRC BMW 2800 CS body now has the decals added.

I've also started to build up the second chassis that came with the kit but using an inline pod that I already had.

Received a car kit from Spain today, a SRC BMW 2800CS.

The SRC BMW 2800 CS body has been built and it went together quite easily.

Received this Vintage 1/24th scale Atlas Marusan Lotus F1 body and chassis, both of which need a bit of work.
zzzWith them I also received a pair of 1/8th axles with knock-off nuts.

Received this 1/32nd scale Slot.It McLaren F1 GTR.

I've now replaced the rear tyres on the MRRC Eagle Westlake with NSR 21x10 Ultragrip Classic tyres and changed the front wheels for slighty wider wheels which are fitted with NSR 18.5x9mm Supergrip Classics which have been trued and sealed. Both these tyres have a tread patten.

With the body post now set in the body I have given the MRRC Eagle Westlake a few laps on my Policar track and it handles quite well. At the moment it is running on the wheels and tyres that came with a Pendle's Policar Super Shells chassis kit.

Received 2 vintage 1/24th scale cars today.

A Testors chassis fitted with a Titan II vac body.

Also an AMF chassis fitted with a MPC vac Corvette body.

Received my latest Corgi Model Club release today a Porsche 906 Carrera 6
.